Gurjan CORE, BWP, Marine grade, IS: 710
Make with RED wood core veneer and cross grain structure make TRIBECA PROGEN stronger than the Gurjan. PF resin used after fortification so that the bonding between the layers becomes stronger than the ordinary resin bonding. Glue line poison added in PF resin to ensure 100% inside protection from termite and borer. Plywood is sanded with numeric controlled wide belt sander to get the calibrated and better surface finish plywood. Final Product is again treated with chemical to provide super protection against termite and borer. Gurjan PF plywood passed more than 108 hour boiling test and it is better choice for interior & exterior use.
Every piece Tribeca PROGEN Plywood is made with high grade ‘Treated and Tenderised’ wood veneers from matured plantation timbers of Eucalyptus, infused with new ‘Four Times Pressed’ formula.
With each veneer measured at 6.0%moisture content, the curing process is done using highly viscous Phenolic resin with a solid content of 60.0 %. Every PROGEN Plywood is 4 times pressed under the controlled heat of 150°C and extreme pressure to compress the veneer-resin pack to obtain superior quality in every piece of TRIBECA PROGEN BWP 710 grade Plywood.
Sizes: 8×4, 7×4
Thickness: 6mm, 9mm, 12mm, 16mm, 19mm
USP:
- Made with 100% Gurjan wood core
- Bonded with PF resin
- 100% water proof
- Termite and borer resistant
- 108 hour boiling test passed
